CP3100
Customer Options
There are six jumpers available for connfiguration. Three of these jumpers, E1, E2 and E3 are used to select the drive's SCSI ID, while E4 (installed) disables parity. Jumpers E5 and E6 areused to enable either the spindle synchronization signal, or LED, respectively.
The following table defines the settings for jumpers E1, E2, and E3.
(The table on this page requires NETSCAPE version 1.1 or later for proper viewing.)
| E1 | E2 | E3 | SCSI ID |
|---|
| OUT | OUT | OUT | O
|
| IN | OUT | OUT | 1 |
| OUT | IN |
OUT | 2 |
| IN | IN | OUT | 3 |
| OUT | OUT | IN | 4 |
| IN | OUT | IN | 5 |
| OUT | IN | IN | 6 |
| IN | IN | IN | 7 |
| Mounting Holes |
|---|
| Side: 6-32 UNC-2B .12 Max. Insertion |
| Bottom: 6-32 UNC-2B .25Max. Insertion |