Customer Options

There are four jumper options available for configuration: *HSP, C/D, DSP and ACT. The following table shows what the jumper settings should be for various system configurations. * Note: HSP is not used.

(The table on this page requires NETSCAPE version 1.1 b3 or later to view properly.)

1 +12V
2 Ground
3 Ground
4 +5V

1 +5V
2 +12V
3 Ground

CMOS Drive Parameters
Cylinders 980
Heads 5
Precomp 0
Landing Zone 980

Mounting Holes
Side: 6-32 UNC-2B .12 MAX. Insertion
Bottom: 6-32 UNC-2B .25 MAX. Insertion