CP30174E
Customer Options

The C/D jumper is used to determine whether the drive is a master (drive C) or slave (drive D). The drive is configured as a master (drive C) when jumpered and as a slave drive (drive D) when not jumpered.


(The table on this page requires NETSCAPE version 1.1 b3 or later to view properly.)

J6
1 +12V
2 Ground
3 Ground
4 +5V

J4
1 +5V
2 +12V
3 Ground

CMOS Drive Parameters
Cylinders 903
Heads 8
Precomp 0
Landing Zone 903

Mounting Holes
Side: 6-32 UNC-2B .12 MAX. Insertion
Bottom: 6-32 UNC-2B .20 MAX. Insertion