Customer Options

The C/D jumper is used to determine whether the drive is a master (drive C) or a slave (drive D). The drive is configured as a master, when jumpered and a slave when not jumpered. The ATA/ISA jumper is used when daisy-chaining two drives. This jumper may have to be removed when this drive is used together with older (Pre-ATA) drives.

(The table on this page requires NETSCAPE version 1.1 b3 or later to view properly.)

1 +12V
2 Ground
3 Ground
4 +5V

1 +5V
2 +12V
3 Ground

CMOS Drive Parameters
Cylinders 685
Heads 16
Precomp 0
Landing Zone 685

Mounting Holes
Side: 6-32 UNC-2B .16 MAX. Insertion
Bottom: 6-32 UNC-2B .22 MAX. Insertion