Customer Options

The CFL420A drive is designed to operate either as a Master drive (drive C) or a Slave Drive (drive D). Commands from the host are written in parallel to both drives. When the C/D jumper on the drive is closed, the drive will assume the role of a master. When C/D is open, the drive will act as a slave. In Single-drive configurations, C/D must remain in the closed (master) position.

(The table on this page requires NETSCAPE version 1.1 or later for proper viewing.)

CMOS Drive Parameters
Landing Zone818

Mounting Holes
Side: 3mmx0.5mm THD(4x) 4mm Max. Insertion
Bottom: 3mmx0.5 THD(4x) 4mm Max. Insertion