Customer Options

The CFL350A drive is designed to operate either as a Master drive (drive C) or a Slave Drive (drive D). Commands from the host are written in parallel to both drives. When the C/D jumper on the drive is closed, the drive will assume the role of a master. When C/D is open, the drive will act as a slave. In Single-drive configurations, C/D must remain in the closed (master) position.

(The table on this page requires NETSCAPE version 1.1 or later for proper viewing.)

CMOS Drive Parameters
Cylinders 905
Landing Zone905

Mounting Holes
Side: 3mmx0.5mm THD(4x) 4mm Max. Insertion
Bottom: 3mmx0.5 THD(4x) 4mm Max. Insertion