CFA340A (CP30344)
Customer Options

The C/D jumper is used to determine whether the drive is a master (drive C) or a slave (drive D). The drive is configured as a master when jumpered and a slave when not jumpered. The ATA/ISA jumper is used when when daisy-chaining two drives. If another manufacturer's drive is being connected to the Conner drive, you may need to install this jumper.

J6
1 +12 V
2Ground
3Ground
4+5V

J4
1+5V
2+12V
3Ground

CMOS Drive Parameters
Cylinders 665
Heads16
Sectors63
Precomp0
Landing Zone665

Mounting Holes
Side: 6-32 UNC-2B .15 Max. Insertion
Bottom: 6-32 UNC-2B .37 Max. Insertion